Vital Oxide - Frequently Asked Questions
Q: Is chlorine dioxide (ClO2) some kind of bleach?
A: No. While chlorine dioxide has chlorine in its name, its chemistry is very different from the corrosive chemistry of chlorine bleach. The primary differences are that chlorine dioxide is less caustic, safer and gentler than bleach and many other antiseptics and antimicrobials, plus it remains effective under organic load.
Q: What does it mean that a disinfectant product is "green"?
A: USEPA is currently reviewing the way third parties will be able to carry "green" claims on all disinfectant labels. EPA policy at this point does not allow "green" claims to be placed directly on any disinfectant product's label. While Vital Oxide is mild on skin, hard surfaces, and fabric, and will certainly qualify for "green status" when the designation is allowed, we can not advertise this claim until it is permitted by the EPA. Vital Oxide is also a powerful disinfectant able to kill some of the toughest and most resistant forms of bacteria and mold. The chemical composition of Vital Oxide is such that it has a minimal impact on the environment and contains no ozone harming volatile compounds (VOC). Further, chlorine bleach produces harmful by-products to the environment including trihalomethanes (THM) and haloacetic acids (HAAS). Vital Oxide breaks down to a simple salt, produces no harmful by-products.
Q: I see that Vital Oxide is used in schools and hospitals, but can I use VO at home?
A: Yes. Vital Oxide is an excellent disinfectant to use around the house. Some of the best places to use Vital Oxide at home are in musty basements, in bathrooms where mildew has accumulated (or on surfaces to protect against mold and mildew), and in the kitchen to keep food surfaces clean. Vital Oxide has also been tested on carpets and can be used around the house to sanitize carpets.
Q: What are the advantages of using sprayers and foggers to disperse Vital Oxide?
A: The quickest way to disinfect a hospital room, entire basement, or school gym is by using a fogger or electrostatic sprayer that can create a fine mist to treat objects, walls, floors, and ceilings in a matter of just a few minutes. Electrostatic sprayers and foggers can dramatically cut the time to disinfect large areas. Vital Oxide is one of the few disinfectants that can be dispersed in this manner because VO is non-corrosive to treated surfaces and objects.
Q: With so many disinfectants and mold removers on the market, why should I choose Vital Oxide?
A: The easiest way to answer this question is simply, "not all disinfectants are created equal". When evaluating and comparing disinfectant products, take a close look at their core ingredients. Vital Oxide uses a unique chemical compound called chlorine dioxide. While other competitors and manufacturers have attempted to copy and produce a form of stabilized chlorine dioxide similar to Vital Oxide, our revolutionary formula is simply unequaled. Chlorine dioxide has been used during Anthrax attacks, in the aftermath of Hurricane Katrina, to purify drinking water, and most recently to kill MRSA in schools and hospitals. Also consider carefully what kind of chemicals you want around your children, employees, patients, students, and close family members. Most disinfectants and mold removers on the market are extremely toxic, but Vital Oxide gives you peace of mind that you are using an effective product that does not come with alarming safety warnings and precautions.
Q: What is the difference between a cleaner and a disinfectant?
A: Cleaners are not registered with the EPA and cannot make public health claims on their label such as killing germs, or having any anti-microbial action.
Q: What is a Hospital Disinfectant?
A: As part of the Environmental Protection Agency registration process, disinfectant products are put through rigorous testing to prove their efficacy and measure toxicity. The EPA registers three types of disinfectants: Limited, General, and Hospital. All three disinfectants destroy or irreversibly inactivate certain microorganisms on hard, inanimate surfaces, and objects
You can determine a “limited,” “general,” or “hospital” disinfectant by the microorganisms listed on the label.
Limited – must be supported by efficacy testing against either Salmonella cholerasuis or Staphylococcus aureus. Limited disinfectants are found mostly in household use.
General – must be supported by efficacy testing against both Salmonella cholerasuis and Staphylococcus aureus.General disinfectants are used in commercial areas.
Hospital – must be supported by AOAC Use Dilution or AOAC Germicidal Spray efficacy testing against Staphylococcus aureus, Salmonella cholerasuis and Pseudomonas aeruginosa. The bacteria Pseudomonas aeruginosa hides behind biofilm and is difficult to eliminate. Killing this bacteria is required for “Hospital Disinfectant”.
Also as part of this evaluation process, products are assigned to a toxicity category: The categories range from category 1 (highly toxic) to category 4 (no exposure warnings required on the label). Vital Oxide received an EPA category 4 rating for all exposure routes with the exception of mild eye irritation.
Q: What is a Sanitizer?
A: A substance, or mixture of substances, intended to reduce the number of microorganisms on inanimate surfaces, in water or air (FIFRA § 4(i)(4)(C)(i)).
Q: What is the difference between a ‘food contact sanitizer’ and a ‘non-food contact sanitizer?
A: food contact sanitizer - At a minimum, reduces the level of Staphylococcus aureus and Escherichia coli by 99.999% on a food contact surface within one minute. A potable water rinse is not allowed after sanitation of a food contact surface.
A non-food contact sanitizer - At a minimum, reduces the level of Staphylococcus aureus and Klebsiella pneumoniae or Enterobacter aerogenes by 99.9% on non-food contact surfaces within 5 minutes.
Q: What does “no rinse required on food contact surface” mean?
A: “No rinse required on food contact surfaces” is a safety rating given by NSF International (previously the National Sanitation Foundation). The NSF testing guidelines are a continuation of the USDA product approval and listing program, including the FDA 21. Vital Oxide is rated “no rise required on food contact surfaces” category D2, meaning Vital Oxide is approved to use in commercial or residential kitchens to control bacteria, viruses and mold without the need to wash/rinse the area with water after Vital Oxide is applied.
Q: Can I clean and disinfect at the same time?
A: In some cases you can clean and disinfect at the same time, but this depends on how dirty the surfaces you are cleaning/disinfecting - the dirtier the surface the less effective the disinfectant. Disinfectants need to contact the area to disinfect, and cannot do this effectively with a barrier of dirt or grime in the way. Once the dirt has been wiped away the disinfectant can get to work. Under lightly soiled conditions, you can clean and disinfect in the same step with just Vital Oxide. (NOTE: EPA requires all disinfectants carry the following label direction: “For heavily soiled areas, a pre-cleaning step is required.”) If there is a question that you have and it is NOT listed in this section, please feel free to email us at: firstname.lastname@example.org
Victory Electrostatic Sprayers – Frequently Asked Questions
Q: What does 'electrostatic' mean?
A: Electrostatic is based on the principle that opposite charges attract and like charges repel. Two positively charged things will repel each other. Using this natural electrostatic phenomenon, Victory has developed a patent pending, breakthrough, cordless application technology.
The Victory Innovations Cordless Electrostatic System places a positive charge on the liquid before entering the nozzle allowing the maximum levels of liquid to be charged and sprayed at negatively charged surfaces (most surfaces are either negative or neutral) allowing for a more complete coverage of the targeted surface.
Q: What do you mean it inserts a charge into the liquid?
A: Using our patent pending technology, the process of positively charging the liquid starts at the charging ring and flows to the tank. This way all the liquid has a positive charge prior to reaching the nozzle. As most surfaces are either negative or neutral, the dispersed droplets spread out more evenly and seek out a negative or neutral surface.
The end result is that the liquid can be applied faster, using less liquid and achieving a more complete coverage of the surface.
Q: Do I need to wipe the area after I use the sprayer?
A: That depends on the chemical being used. There are many sanitizers and disinfectants that require no rinsing or wiping required after application. Always check with the chemical manufacturer if you are unsure.
Q: How will this save me time and money?
A: In testing, we found our Cordless Electrostatic System is 70% faster and uses 65% less chemicals than a traditional sprayer. That’s a significant increase in efficiency that will definitely save you time and money.
Q: How long does it take to dry?
A: There are many variables that can affect drying times including temperature, humidity, particle size, and the chemical used. The Victory 3-in-1 nozzle allows you to select from three different size particles which can help you customize the drying time.
Q: How far does the spray reach?
A: The maximum spray distance is up to 5 feet but we recommend the optimum range for complete coverage is 20-30 inches depending on the nozzle selection. We also offer an extender wand that increases the reach.
Q: Is the battery rechargeable?
A: Yes, it comes with a 16.8 Volt Lithium-Ion Battery (VP20) that lasts up to 4 hours. The charger comes with each sprayer.
Q: What is your warranty policy?
A: ONE YEAR LIMITED WARRANTY - Victory Innovations will repair or replace, without charge, any defects due to faulty materials or workmanship for one year from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse.
For further detail of warranty coverage and warranty repair information, email us at email@example.com.
This warranty does not apply to damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights, which vary in certain states or provinces.
FREE WARNING LABEL REPLACEMENT
If your warning labels become illegible or are missing, email us at firstname.lastname@example.org for a free replacement.
Q: Are there any cleaning or maintenance tips you can share?
A: After each use before storing or before switching chemicals, spray water through the machine for 20 seconds to rinse out the line of any leftover chemicals that may start to build up. Do not transport or store chemicals in the tank while connected to the sprayer. If you want to store chemicals in the tank, we recommend you purchase a tank cap and seal up the tank during transporting and storage of the sprayer. If you do not empty the tank, the user runs the risk of the liquid spilling in the case and damaging the electrical board in the unit or in the battery. A plugged nozzle can occur if the machine is not regularly rinsed. If you have a plugged nozzle, remove the nozzle, soak in hot, soapy water for 10 minutes, then blow out the nozzle with compressed air. Watch our video on cleaning and maintenance to see a demonstration.
Q: What certifications do your products have?
A: Our products are certified compliant with the standards and requirements of the ETL (Edison Testing Lab), the CSA (Canadian Standards Association), the FCC (Federal Communication Commission), the CE (European Commission), the RoHS (Restriction of Hazardous Substances), and the NOM (Mexican Official Standards).